EVM-7 Advanced Particulate and Air Quality Monitor

Description EVM-7 Regular Description Features Specifications Documentation Accessories Replacement Sensors Calibration The EVM Series Particulate Mass Concentration and Air Quality Monitors simultaneously measure particulates and gas concentration in real-time. The EVM-7 measures both particulates and air quality, and provides a lower cost of ownership by combining three instruments into one. *Includes base model with PID (ppm) Sensor, CO2 Sensor, one Dummy Sensor (used to seal socket when no sensor is present), two 37mm Gravimetric Filter Cassettes (for pump protection; one in unit and one spare), 053-263 12V DC Universal Input Power Supply, 053-575 USB Cable, 100-456 Silicone Dielectric Grease for Impactors, 074-090 10 pack Pump Protection Filters, 074-720 Dust Zero Calibration Filter Assembly, 074-726 Toxic Calibration Adapter and 074-718 Storage Case.* Particulate, gas and photoionization detector (PID) measurement from a single device Less equipment to carry to job site; compact, user-friendly design 90-degree light scattering laser photometer measures particulates in real-time Proprietary technology for selecting particulate settings; no need for external cyclones Built in sampling pump allows for gravimetric analysis Large, easy-to-read display with trend graphing for measurements Time history data logging and compatibility with Detection Management Software makes analysis efficient General Display LanguagesEnglish, French, German, Italian, Portuguese, and Spanish User Interface10 pushbuttons and 4 softkeys, menu driven Display TypeTransreflective 128 x 64 LCD with backlighting Software CompatibilityTSI Quest Detection Management Software DMS StandardsCE Mark and RoHS compliant Particulate Impactors Size FractionsPM2.5, PM4, PM10 or TSP (within the instrument’s measurement range) Flow Rate1.67 L/min Displayed Data MeasurementsLevel, Minimum, Maximum, Average, Short-Term Exposure Level (STEL), Time Weighted Average (TWA) Real-Time MeasurementOnce per second display update rate Time History Data Logging IntervalsSeconds: 1, 5, 15, 30 Minutes: 1, 5, 10, 15, 30, 60 Trend Graphing Intervals for All ParametersMinutes: 1.5, 3, 15 Hours: 1.5, 3, 8, 12, 24 Status IndicatorsBattery, Run, Stop, Overload and UnderRange Averaging Time1 to 30 seconds Physical Characteristics Size7.5” x 7.5” x 2.75” (19 cm x 19 cm x 7 cm) Weight2.9 lb (1.3 kg) HousingStatic dissipative ABS Polycarbonate housing Tripod Mount Standard photographic mount on bottom, 1/4” - 20 screw heads Operating Conditions Temperature Range32 °F - 122 °F (0 °C to 50 °C) Pressure Range65 kPa to 108 kPa Relative Humidity Range10% to 90% non-condensing Storage Conditions Temperature-4 °F to 140 °F (-20 °C to 60 °C) Humidity0% to 95% RH, non-condensing Electrical Characteristics Intelligent SensorsAuto-detectable when inserted at power-off mode Battery PackRechargeable lithium-ion Battery LifeMinimum of 8 hours under continuous operation External DC Power Input10 to 16 Volt power inlet (nominal 12V DC) 1.5A Power AdapterUniversal AC adapter 100 to 240 Volt AC, 50-60 Hz MethodBase UnitsDisplay ResolutionDisplay RangeAccuracy Repeatability VOC: 10.6eV Photoionization Detector Low Sensitivity PIDselect ppb or mg /m30.010.00 - 2,000 /-5% / 2%*** at calibration level High Sensitivity PIDselect ppb or μg /m310 - 50,000 /-5% / 2%*** at calibration level CO2 NDIR (Non-Dispersive Infrared)ppm10 - 5,000 ppm; autoranging (Noncondensing) /-100 ppm @ 20 deg C, 1 bar pressure at 2,000 ppm applied gas Temperature Junction Diodedeg C0.10.0 - 60.0 /- 1.1 deg C deg F0.132.0 - 140 /- 2 deg F Relative Humidity Capacitive% humidity0.10.0 - 100 /-5% RH* of signal between 10%-90% Air Velocity Omni-directional Heated Thermistor Windprobemeter/sec0.10.0 - 20 /-0.12 m/s 4.5% of signal feet/min10 - 3940 /-23.6 ft/min 4.5% of signal Particulates 90° Light Scattering / Integrating Photometermg / m30.0010.000 - 200.0 /-15% (rel ARD*) μg / m310 - 20,000 /-15% (rel ARD*) Particulates Size RangeμmN/A0.1 - 10** Electrochemical Sensor CO - Carbon Monoxide Sensorppm10 - 1,000 /-5% / 2% of signal Cl2 - Chlorine Sensorppm0.10.0 - 20 /-5% / 2% of signal EtO - Ethylene Oxide Sensorppm0.10.0 - 20 /-5% / 2% of signal HCN - Hydrogen Cyanide Sensorppm0.10.0 - 50 /-5% / 2% of signal H2S - Hydrogen Sulfide Sensorppm10.0 - 500 /-5% / 2% of signal NO - Nitric Oxide Sensorppm0.10.0 - 100 /-5% / 2% of signal NO2 - Nitrogen Dioxide Sensorppm0.10.0 - 50 /-5% / 2% of signal O2 - Oxygen Sensor%0.10.0 - 30 /-5% / 2% of signal SO2 - Sulfur Dioxide Sensorppm0.10.0 - 50 /-5% / 2% of signal EVM-3EVM-4EVM-7 EVM Monitor TypesParticulate Monitor (no indoor air quality monitor)Indoor Air Quality Monitor (no particulates)Indoor Air Quality/Particulate Monitor (eliminates the need for separate meters) Temperature Relative Humidity Air Velocity (With Purchase of Optional Accessory) Particulates (Mass Concentration) Toxic Gas (Choose from 9 Sensors) Carbon Dioxide Select Volatile Organic Compounds EVM Datasheet EVM User Manual 1.0 lpm Regulator with 2 feet (0.050 inch ID) Tubing $360.00 Add to cart 10-pack of Pump Protection Filters (for gravimetric cassette) $100.00 Add to cart 12 Volt DC Universal Input Power Supply $185.00 Add to cart AirProbe-10 Adapter Cable $165.00 Add to cart Airprobe-10 Kit $2,415.00 Add to cart Auto DC Jack Cable for 12 VDC, Car Plug style charger cable $90.00 Add to cart CD containing Detection Management Software for use with QUEST datalogging products $240.00 Add to cart Dual 120V AC Charger for AirProbe $145.00 Add to cart Dust Zero Calibration Filter Assembly $55.00 Add to cart EVM Storage Case $435.00 Add to cart Mounting Bracket for AirProbe-10 $95.00 Add to cart PID (ppb) Replacement Electrode (Grid) Pellet – Includes 2 Grids/Pellets $130.00 Add to cart PID (ppb) Replacement Lamp $640.00 Add to cart PID (ppm or ppb) Lamp Cleaning $265.00 Add to cart PID (ppm) Replacement Electrode (Grid) Pellet – Includes 2 Grids/Pellets $100.00 Add to cart PID (ppm) Replacement Lamp $310.00 Add to cart Replacement NiMH Battery for AirProbe $165.00 Add to cart Toxic Calibration Adapter $55.00 Add to cart TP-1 Tripod $150.00 Add to cart USB containing Detection Management Software for use with QUEST data- logging products $240.00 Add to cart USB Type A to USB Mini Cable for SoundPro SE/DL, SE400 Series, Edge Noise Dosimeters, NI-100, and EVM series $20.00 Add to cart EVM Carbon Dioxide (CO2) Sensor, 0 – 20,000 (ppm) $810.00 Add to cart EVM Carbon Dioxide (CO2) Sensor, 0 – 5,000 (ppm) $810.00 Add to cart EVM Carbon Monoxide (CO) Smart Sensor $315.00 Add to cart EVM Chlorine (Cl2) Smart Sensor $510.00 Add to cart EVM Dummy Sensor (used to seal socket when no sensor is present) $90.00 Add to cart EVM Ethylene Oxide (EtO) Smart Sensor $480.00 Add to cart EVM Hydrogen Cyanide (HCN) Smart Sensor $480.00 Add to cart EVM Hydrogen Sulfide (H2S) Smart Sensor $325.00 Add to cart EVM Nitric Oxide (NO) Smart Sensor $480.00 Add to cart EVM Nitrogen Dioxide (NO2) Smart Sensor $510.00 Add to cart EVM Oxygen (O2) Smart Sensor $165.00 Add to cart EVM PID (ppb) Sensor – Includes 074-729 PID Smart Sensor & 074-080 PID Cleaning $4,450.00 Add to cart EVM PID (ppm) Sensor – Includes 074-713 PID Smart Sensor & 074-080 PID Cleaning $2,510.00 Add to cart EVM PID Smart Sensor (ppb) $4,430.00 Add to cart EVM PID Smart Sensor (ppm) $2,430.00 Add to cart EVM Sulfur Dioxide (SO2) Smart Sensor $480.00 Add to cart TSI Quest EVM-7 Standard Calibration Call for Price Call for Price TSI Quest EVM-7 Standard Repair & Calibration Call for Price Call for Price TSI Quest EVM-7 Standard Calibration Call for Price Call for Price TSI Quest EVM-7 Standard Repair & Calibration Call for Price Call for Price